Shop

PEC’s own in house design facilities are able to create many different components but for nearly 10 years now, it’s our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range.

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

 

Specifiction:

Part Number G0110
Engine Type 1.6 16v Zetec “Sigma” non VVT
Length C/C 137.00mm
Small End Diameter 18.00mm
Small End Width 18.00mm
Big End Diameter 47.00mm
Big End Width 20.80mm

 

Bolt specifications

 

PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp onmost 4cyl engines) and on the ARP 2000 series 3/8 bolts normallyprovided & have an8,500RPM safe operating limit (engine specific).

In some cases, we reccomend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration.

Prolonged high RPM’s for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod.

If in doubt, please contact us for advice.

 

What’s in the box?

  • 4x PEC H-beam forged steel connecting rods
  • 8x ARP 2000 series / ARP custom age 625 connecting rod bolts (choose from options)
  • 1x ARP fastener assembly lubricant
  • 1x PEC connecting rod installation guideline sheet

Depending on stock levels you may also receive:

  • 1x free PEC Automotive logo sticker (colour selected at random by dispatcher)
  • 1x free PEC key ring
Bolt Type

ARP2000, ARP625

Brand

Wossner

Reviews

There are no reviews yet.

Be the first to review “Ford Zetec 1.6 16v (Sigma) H-Beam PEC Steel Connecting Rods”

Your email address will not be published. Required fields are marked *

Make Model Year
Make Model Year
Ford
1
    1
    Your Cart
    Placeholder Remove
    Mintex 1131F4R18.00
    1 X £258.22 = £258.22